Error Message While Schaling BitMap Image

[sim123]

I compiled IM for CentOS and trying identify over there? could something wrong with my configuration?

[fmw42]

please try to convert image using Preview application on OS X not by ImageMagick and then identify that image

I did that and it worked fine. See my previous post.

With regard to CENTOS, I am not Linux expert, so you may need to wait for Anthony or Magick to reply on that. Sorry.

[sim123]

I tried installing new version of ImageMagick on MAC OS X from source

ftp://ftp.imagemagick.org/pub/ImageMagi ... 2-4.tar.gz

after compiling it identify test.bmp does not work. I don't know what could go wrong? Is the version correct?

Thanks for the help.

[fmw42]

that seems to be the same IM file I used


what do you get from

convert rose: rose.bmp
identify rose.bmp


my configuration on Mac OSX Tiger was

./configure --enable-delegate-build --enable-shared --disable-static \
--with-modules --with-quantum-depth=16 --with-gslib --without-wmf \
--enable-libtool-verbose --disable-dependency-tracking \
--with-gs-font-dir=/usr/local/share/ghostscript/fonts/ --with-lqr

but you should remove --with-lqr as I have installed the liblqr for liquid-rescale

[sim123]

convert rose: rose.bmp
identify rose.bmp
rose.bmp BMP 70x46 70x46+0+0 8-bit DirectClass 9.58kb

so it works, convert works too, its the identify which does not display any result for Preview generated bmp.

I just configure using ./configure --prefix=/opt/ImageMagick-6.5.2-4

my convert -list configure says

DELEGATES bzlib freetype jpeg jng jp2 png tiff x11 xml zlib
DISTCHECK_CONFIG_FLAGS --disable-deprecated --with-quantum-depth=16 --with-umem=no --with-autotrace=no --with-gslib=no --with-fontpath=

LIBS -lMagickCore -ltiff -lfreetype -ljpeg -lXext -lSM -lICE -lX11 -lXt -lbz2 -lz -lm -lpthread -lltdl

I don't have ghostscript and fonts, can that be an issue?

Thanks

[fmw42]

I doubt GS or fonts is the issue with bmp. Seems like it is some bug in Preview. Try

convert rose: rose.bmp

Then open rose.bmp in Preview and save as rose2.bmp

then

identify rose.bmp
identify rose2.bmp

If the second does not work, then what do you get from:

convert rose2.bmp info:

If this works, just use convert image info: as it is pretty much the same as identify.

But you can also then do

convert rose2.bmp -verbose info:

and report back what it says.

Seems like Preview is possibly corrupting your bmp in some way.

[sim123]

I tried it and identify does not work for rose2.bmp. below is the output for convert rose2.bmp -verbose info:

Code: Select all

  Image: rose2.bmp
  Format: BMP (Microsoft Windows bitmap image)
  Class: DirectClass
  Geometry: 70x46+0+0
  Resolution: 28.35x28.35
  Print size: 2.46914x1.62257
  Units: PixelsPerCentimeter
  Type: TrueColor
  Endianess: Undefined
  Colorspace: RGB
  Depth: 8-bit
  Channel depth:
    red: 8-bit
    green: 8-bit
    blue: 8-bit
  Channel statistics:
    red:
      min: 35 (0.137255)
      max: 255 (1)
      mean: 145.712 (0.57142)
      standard deviation: 69.2953 (0.271746)
      kurtosis: -1.385
      skewness: 0.14637
    green:
      min: 22 (0.0862745)
      max: 255 (1)
      mean: 89.2602 (0.35004)
      standard deviation: 52.4698 (0.205764)
      kurtosis: 2.63898
      skewness: 1.81893
    blue:
      min: 24 (0.0941176)
      max: 255 (1)
      mean: 80.4683 (0.315562)
      standard deviation: 55.1114 (0.216123)
      kurtosis: 3.01818
      skewness: 1.9795
  Image statistics:
    OverAll:
      min: 0 (0)
      max: 255 (1)
      mean: 78.8602 (0.309256)
      standard deviation: 73.1284 (0.286778)
      kurtosis: 0.0669201
      skewness: 0.96904
  Rendering intent: Undefined
  Interlace: None
  Background color: white
  Border color: rgb(223,223,223)
  Matte color: grey74
  Transparent color: black
  Page geometry: 70x46+0+0
  Dispose: Undefined
  Iterations: 0
  Compression: Undefined
  Orientation: Undefined
  Properties:
    create-date: 2009-05-13T20:36:44-07:00
    modify-date: 2009-05-13T20:36:44-07:00
    signature: a698f2fe0c6c31f83d19554a6ec02bac79c961dd9a87e7ed217752e75eb615d7
  Artifacts:
    verbose: true
  Tainted: False
  Filesize: 9.58kb
  Number pixels: 3.14kb
  Version: ImageMagick 6.5.2-4 2009-05-13 Q16 http://www.imagemagick.org

I don't know if preview is doing that because earlier version of ImageMagick (6.4.5) could identify bmp images created by preview.
I am using Preview 4.6 on MAC OS X 10.5.7 (Leopard).

[fmw42]

The verbose info looks reasonable to me. So at this point, I am lost as to why convert image.bmp info: works and identify image.bmp does not. Please confirm that

convert rose: rose.bmp
identify rose.bmp

works, but

converting rose.bmp to rose2.bmp from Preview, then
identify rose2.bmp

does not work.

If that is the case, then this is beyond me. You need help from one of the IM experts at that point.

It seems to work fine for me using IM 6.5.2-4 Q16 Mac OSX Tiger, but does not work for you using Leopard and the same IM version?

[sim123]

Code: Select all

$ convert rose: rose.bmp
$ identify rose.bmp
rose.bmp BMP 70x46 70x46+0+0 8-bit DirectClass 9.58kb 

// convert rose.bmp to rose2.bmp from preview

$ identify rose2.bmp
$ convert rose2.bmp info:
rose2.bmp BMP 70x46 70x46+0+0 8-bit DirectClass 9.58kb 

Its not only Leopard, CentOS gives me same result. What is Q16 hear, could it cause any difference? Please help.

[fmw42]

Q16 is the default install and represents that IM is using 16-bit storage. You can configure IM for 8,16,32 bits or even HDRI.

Type

convert -list configure

You will see what it is at:

CONFIGURE ./configure '--enable-delegate-build' '--enable-shared' '--disable-static' '--with-modules' '--with-quantum-depth=16' '--with-gslib' '--without-wmf' '--enable-libtool-verbose' '--disable-dependency-tracking' '--with-gs-font-dir=/usr/local/share/ghostscript/fonts/' '--with-lqr'

or simply from

QuantumDepth 16

I doubt that has anything to do with it. But you can check and see if you are using Q16 or the other common one is Q8.

[sim123]

Thanks for your help and time, I see it at

DISTCHECK_CONFIG_FLAGS --disable-deprecated --with-quantum-depth=16 --with-umem=no --with-autotrace=no --with-gslib=no --with-fontpath=

and my configure is

CONFIGURE ./configure '--prefix=/opt/ImageMagick-6.5.2-4'

so I am assuming its Q16. Now I don't know where to look for this problem. I need identify to work because my program looks for image types via identify and I can not change that part. Earlier versions of IM can handle this case than why can't newer versions? I don't even know if its IM or my configuration? Could some one please help.

Thanks

[fmw42]

Is it not possible for you to replace:

identify image

with

convert image info:

in your code?


If not or anyway, that is as far as I can try to help. It is beyond me. Try posting to bug forum and see what they say. Refer to this post so they see all the background.

[fmw42]

A few other thoughts. See what these give:

identify yourimage.bmp 2>&1

identify -ping yourimage.bmp

identify -respect-parenthesis yourimage.bmp

identify -debug all yourimage.bmp

The latter may be of help to the IM folks if it returns anything. So add a new post to your bug report

or a combination of them all

identify -ping -respect-parenthesis -debug all yourimage.bmp 2>&1

[sim123]

Thanks for another clue, below is the result, will post it on the bug forum too:
these logs have an entry for /Users/admin/.magick/coder.xml , could we suspect on this?

Code: Select all

admins-macbook-pro:Desktop admin$ identify -ping -respect-parenthesis -debug all rose2.bmp 2>&1
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: utility.c/ExpandFilenames/862/Configure
  Command line: identify {-ping} {-respect-parenthesis} {-debug} {all} {rose2.bmp}
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "/opt/ImageMagick-6.5.2-4/share/ImageMagick-6.5.2/config/coder.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "/opt/ImageMagick-6.5.2-4/lib/ImageMagick-6.5.2/config/coder.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "/opt/ImageMagick-6.5.2-4/share/doc/ImageMagick-6.5.2/coder.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "/opt/ImageMagick-6.5.2-4/share/ImageMagick-6.5.2/coder.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "/Users/admin/.magick/coder.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "coder.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: coder.c/LoadCoderList/639/Configure
  Loading coder configuration file "/opt/ImageMagick-6.5.2-4/share/ImageMagick-6.5.2/config/coder.xml" ...
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Module identify[97071]: module.c/OpenModule/1143/Module
  Searching for module "BMP" using filename "bmp.la"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Module identify[97071]: module.c/GetMagickModulePath/548/Module
  Searching for coder module file "bmp.la" ...
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Module identify[97071]: module.c/OpenModule/1152/Module
  Opening module at path "/opt/ImageMagick-6.5.2-4/lib/ImageMagick-6.5.2/modules-Q16/coders/bmp.la"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Module identify[97071]: module.c/OpenModule/1179/Module
  Method "RegisterBMPImage" in module "BMP" at address 0x79e3f0
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Module identify[97071]: module.c/OpenModule/1193/Module
  Method "UnregisterBMPImage" in module "BMP" at address 0x79e510
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Blob identify[97071]: blob.c/OpenBlob/2403/Blob
    read 3 magic header bytes
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "/opt/ImageMagick-6.5.2-4/share/ImageMagick-6.5.2/config/magic.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "/opt/ImageMagick-6.5.2-4/lib/ImageMagick-6.5.2/config/magic.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "/opt/ImageMagick-6.5.2-4/share/doc/ImageMagick-6.5.2/magic.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "/opt/ImageMagick-6.5.2-4/share/ImageMagick-6.5.2/magic.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "/Users/admin/.magick/magic.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: configure.c/GetConfigureOptions/528/Configure
  Searching for configure file: "magic.xml"
2009-05-14T16:32:23-07:00 0:01 0.000u 6.5.2 Configure identify[97071]: magic.c/LoadMagicList/682/Configure
  Loading magic configure file "/opt/ImageMagick-6.5.2-4/share/ImageMagick-6.5.2/config/magic.xml" ...
2009-05-14T16:32:23-07:00 0:01 0.010u 6.5.2 Blob identify[97071]: blob.c/OpenBlob/2403/Blob
    read 3 magic header bytes
2009-05-14T16:32:23-07:00 0:01 0.010u 6.5.2 Blob identify[97071]: blob.c/OpenBlob/2403/Blob
    read 3 magic header bytes
2009-05-14T16:32:23-07:00 0:01 0.010u 6.5.2 Coder identify[97071]: bmp.c/ReadBMPImage/588/Coder
    Magick: BM
2009-05-14T16:32:23-07:00 0:01 0.010u 6.5.2 Coder identify[97071]: bmp.c/ReadBMPImage/598/Coder
    BMP size: 40
2009-05-14T16:32:23-07:00 0:01 0.010u 6.5.2 Coder identify[97071]: bmp.c/ReadBMPImage/644/Coder
    Format: MS Windows bitmap
2009-05-14T16:32:23-07:00 0:01 0.010u 6.5.2 Coder identify[97071]: bmp.c/ReadBMPImage/646/Coder
    Geometry: 70x-46
2009-05-14T16:32:23-07:00 0:01 0.010u 6.5.2 Coder identify[97071]: bmp.c/ReadBMPImage/648/Coder
    Bits per pixel: 24
2009-05-14T16:32:23-07:00 0:01 0.010u 6.5.2 Coder identify[97071]: bmp.c/ReadBMPImage/654/Coder
    Compression: BI_RGB
2009-05-14T16:32:23-07:00 0:01 0.010u 6.5.2 Coder identify[97071]: bmp.c/ReadBMPImage/694/Coder
    Number of colors: 0
2009-05-14T16:32:23-07:00 0:01 0.010u 6.5.2 Coder identify[97071]: bmp.c/ReadBMPImage/898/Coder
    Reading pixels (9752 bytes)
2009-05-14T16:32:23-07:00 0:01 0.020u 6.5.2 Resource identify[97071]: resource.c/AcquireMagickResource/222/Resource
  Area: 25.2kb/25.2kb/4gb
2009-05-14T16:32:23-07:00 0:01 0.020u 6.5.2 Resource identify[97071]: resource.c/AcquireMagickResource/222/Resource
  Memory: 25.2kb/25.2kb/3gb
2009-05-14T16:32:23-07:00 0:01 0.020u 6.5.2 Cache identify[97071]: cache.c/OpenPixelCache/3832/Cache
  open rose2.bmp[0] (heap memory, 70x46 25.2kb)
2009-05-14T16:32:23-07:00 0:01 0.020u 6.5.2 Resource identify[97071]: resource.c/RelinquishMagickResource/857/Resource
  Memory: 25.2kb/0b/3gb
2009-05-14T16:32:23-07:00 0:01 0.020u 6.5.2 Cache identify[97071]: cache.c/DestroyPixelCacheInfo/1513/Cache
  destroy rose2.bmp[0]
2009-05-14T16:32:23-07:00 0:01 0.020u 6.5.2 Cache identify[97071]: cache.c/DestroyPixelCacheInfo/1513/Cache
  destroy 

Thanks

[fmw42]

I will have to leave this to the IM experts to interpret.