Convert not working after install on PowerPC Mac
Convert not working after install on PowerPC Mac
I just went through the "painful" process of installing ImageMagick and all it's dependencies on a PowerPC Mac (OS X Server 10.5..
Now trying to see if convert will work I run it and it hangs.
$ convert test-image.jpg test-image.png
hangs
read through these forums a bit and tried it with the -debug all flag set and got a ton of output but at the end it looks like this:
Application built with libpng-1.2.26 but running with 1.5.2 `test-image.png'
2011-05-17T17:48:28-07:00 0:02.370 0.880u 6.6.9 Exception convert[357]: png.c/WriteOnePNGImage/8214/Exception
memory allocation failed `test-image.png'
2011-05-17T17:48:28-07:00 0:02.370 0.880u 6.6.9 Coder convert[357]: png.c/WritePNGImage/10721/Coder
exit WritePNGImage()
2011-05-17T17:48:28-07:00 0:02.370 0.880u 6.6.9 Cache convert[357]: cache.c/DestroyPixelCache/1504/Cache
destroy test-image.jpg[0]
2011-05-17T17:48:28-07:00 0:02.380 0.890u 6.6.9 Resource convert[357]: resource.c/RelinquishMagickResource/810/Resource
Memory: 25.17MB/24MiB/2GiB
It hangs right after that last Memory line. Anyone know what is going on? Yes, I downloaded and installed libpng-1.5.2 into /usr/local (or at least that's what I had tried to do) before downloading and installing ImageMagick with these arguments: IMAGEMAGICK_ARGUMENTS="--disable-static --with-modules --without-perl --without-magick-plus-plus --with-quantum-depth=8 --disable-openmp"
Now trying to see if convert will work I run it and it hangs.
$ convert test-image.jpg test-image.png
hangs
read through these forums a bit and tried it with the -debug all flag set and got a ton of output but at the end it looks like this:
Application built with libpng-1.2.26 but running with 1.5.2 `test-image.png'
2011-05-17T17:48:28-07:00 0:02.370 0.880u 6.6.9 Exception convert[357]: png.c/WriteOnePNGImage/8214/Exception
memory allocation failed `test-image.png'
2011-05-17T17:48:28-07:00 0:02.370 0.880u 6.6.9 Coder convert[357]: png.c/WritePNGImage/10721/Coder
exit WritePNGImage()
2011-05-17T17:48:28-07:00 0:02.370 0.880u 6.6.9 Cache convert[357]: cache.c/DestroyPixelCache/1504/Cache
destroy test-image.jpg[0]
2011-05-17T17:48:28-07:00 0:02.380 0.890u 6.6.9 Resource convert[357]: resource.c/RelinquishMagickResource/810/Resource
Memory: 25.17MB/24MiB/2GiB
It hangs right after that last Memory line. Anyone know what is going on? Yes, I downloaded and installed libpng-1.5.2 into /usr/local (or at least that's what I had tried to do) before downloading and installing ImageMagick with these arguments: IMAGEMAGICK_ARGUMENTS="--disable-static --with-modules --without-perl --without-magick-plus-plus --with-quantum-depth=8 --disable-openmp"
- fmw42
- Posts: 25562
- Joined: 2007-07-02T17:14:51-07:00
- Authentication code: 1152
- Location: Sunnyvale, California, USA
Re: Convert not working after install on PowerPC Mac
did you install from binary or from source?
what happens when you type:
convert -version
what do you get for
convert -list configure
Look on the line DELEGATES and see what is there for png, jpg, etc
how about
convert logo: logo.gif
does that work?
I am running on IM 6.6.9.9 Q16 Mac OSX Tiger PowerPC G4 Mac mini and am not having any problem.
what happens when you type:
convert -version
what do you get for
convert -list configure
Look on the line DELEGATES and see what is there for png, jpg, etc
how about
convert logo: logo.gif
does that work?
I am running on IM 6.6.9.9 Q16 Mac OSX Tiger PowerPC G4 Mac mini and am not having any problem.
Re: Convert not working after install on PowerPC Mac
I installed from source. wasn't aware of any PowerPC Mac binary.
$ convert -version
Version: ImageMagick 6.6.9-9 2011-05-17 Q8 http://www.imagemagick.org
Copyright: Copyright (C) 1999-2011 ImageMagick Studio LLC
Features:
---------------
$ convert -list configure
Path: /usr/local/share/ImageMagick-6.6.9/configure.xml
Name Value
-------------------------------------------------------------------------------
CC gcc -std=gnu99 -std=gnu99
CFLAGS -g -O2 -Wall -D_THREAD_SAFE -pthread
CODER_PATH /usr/local/lib/ImageMagick-6.6.9/modules-Q8/coders
CONFIGURE ./configure '--prefix=/usr/local' '--disable-static' '--with-modules' '--without-perl' '--without-magick-plus-plus' '--with-quantum-depth=8' '--disable-openmp' '--with-gs-font-dir=/usr/local/share/ghostscript/fonts' 'LDFLAGS=-L/usr/local/lib' 'CPPFLAGS=-I/usr/local/include'
CONFIGURE_PATH /usr/local/etc/ImageMagick/
COPYRIGHT Copyright (C) 1999-2011 ImageMagick Studio LLC
CPPFLAGS -I/usr/local/include/ImageMagick
CXX g++
CXXFLAGS -g -O2 -D_THREAD_SAFE -pthread
DEFS -DHAVE_CONFIG_H
DELEGATES bzlib freetype jpeg jng lcms2 png tiff x11 xml wmf zlib
DISTCHECK_CONFIG_FLAGS 'CPPFLAGS=-I/usr/local/include' 'LDFLAGS=-L/usr/local/lib' --disable-deprecated --with-umem=no --with-autotrace=no --with-gslib=no --with-fontpath= --with-gs-font-dir=/usr/local/share/ghostscript/fonts --with-perl=no
DOCUMENTATION_PATH /usr/local/share/doc/ImageMagick-6.6.9/
EXEC-PREFIX /usr/local
EXECUTABLE_PATH /usr/local/bin
FEATURES
FILTER_PATH /usr/local/lib/ImageMagick-6.6.9/modules-Q8/filters
HOST powerpc-apple-darwin9.8.0
LDFLAGS -L/usr/local/lib -L/usr/local/lib -L/usr/X11/lib -R/usr/X11/lib
LIB_VERSION 0x669
LIB_VERSION_NUMBER 6,6,9,9
LIBRARY_PATH /usr/local/lib/ImageMagick-6.6.9
LIBS -lMagickCore -llcms2 -ltiff -lfreetype -ljpeg -lXext -lSM -lICE -lX11 -lXt -lbz2 -lz -lm -lpthread
NAME ImageMagick
PCFLAGS
PREFIX /usr/local
QuantumDepth 8
RELEASE_DATE 2011-05-17
SHARE_PATH /usr/local/share/ImageMagick-6.6.9
SVN_REVISION exported
TARGET_CPU powerpc
TARGET_OS darwin9.8.0
TARGET_VENDOR apple
VERSION 6.6.9
WEBSITE http://www.imagemagick.org
Path: [built-in]
Name Value
-------------------------------------------------------------------------------
NAME ImageMagick
------------
$ ls
$ convert logo: logo.gif
$ ls
logo.gif
$
It would appear as though this works when converting to .gif but not to .png... and maybe i'm using it wrong but resizing doesn't appear to work either.
$ convert -version
Version: ImageMagick 6.6.9-9 2011-05-17 Q8 http://www.imagemagick.org
Copyright: Copyright (C) 1999-2011 ImageMagick Studio LLC
Features:
---------------
$ convert -list configure
Path: /usr/local/share/ImageMagick-6.6.9/configure.xml
Name Value
-------------------------------------------------------------------------------
CC gcc -std=gnu99 -std=gnu99
CFLAGS -g -O2 -Wall -D_THREAD_SAFE -pthread
CODER_PATH /usr/local/lib/ImageMagick-6.6.9/modules-Q8/coders
CONFIGURE ./configure '--prefix=/usr/local' '--disable-static' '--with-modules' '--without-perl' '--without-magick-plus-plus' '--with-quantum-depth=8' '--disable-openmp' '--with-gs-font-dir=/usr/local/share/ghostscript/fonts' 'LDFLAGS=-L/usr/local/lib' 'CPPFLAGS=-I/usr/local/include'
CONFIGURE_PATH /usr/local/etc/ImageMagick/
COPYRIGHT Copyright (C) 1999-2011 ImageMagick Studio LLC
CPPFLAGS -I/usr/local/include/ImageMagick
CXX g++
CXXFLAGS -g -O2 -D_THREAD_SAFE -pthread
DEFS -DHAVE_CONFIG_H
DELEGATES bzlib freetype jpeg jng lcms2 png tiff x11 xml wmf zlib
DISTCHECK_CONFIG_FLAGS 'CPPFLAGS=-I/usr/local/include' 'LDFLAGS=-L/usr/local/lib' --disable-deprecated --with-umem=no --with-autotrace=no --with-gslib=no --with-fontpath= --with-gs-font-dir=/usr/local/share/ghostscript/fonts --with-perl=no
DOCUMENTATION_PATH /usr/local/share/doc/ImageMagick-6.6.9/
EXEC-PREFIX /usr/local
EXECUTABLE_PATH /usr/local/bin
FEATURES
FILTER_PATH /usr/local/lib/ImageMagick-6.6.9/modules-Q8/filters
HOST powerpc-apple-darwin9.8.0
LDFLAGS -L/usr/local/lib -L/usr/local/lib -L/usr/X11/lib -R/usr/X11/lib
LIB_VERSION 0x669
LIB_VERSION_NUMBER 6,6,9,9
LIBRARY_PATH /usr/local/lib/ImageMagick-6.6.9
LIBS -lMagickCore -llcms2 -ltiff -lfreetype -ljpeg -lXext -lSM -lICE -lX11 -lXt -lbz2 -lz -lm -lpthread
NAME ImageMagick
PCFLAGS
PREFIX /usr/local
QuantumDepth 8
RELEASE_DATE 2011-05-17
SHARE_PATH /usr/local/share/ImageMagick-6.6.9
SVN_REVISION exported
TARGET_CPU powerpc
TARGET_OS darwin9.8.0
TARGET_VENDOR apple
VERSION 6.6.9
WEBSITE http://www.imagemagick.org
Path: [built-in]
Name Value
-------------------------------------------------------------------------------
NAME ImageMagick
------------
$ ls
$ convert logo: logo.gif
$ ls
logo.gif
$
It would appear as though this works when converting to .gif but not to .png... and maybe i'm using it wrong but resizing doesn't appear to work either.
- fmw42
- Posts: 25562
- Joined: 2007-07-02T17:14:51-07:00
- Authentication code: 1152
- Location: Sunnyvale, California, USA
Re: Convert not working after install on PowerPC Mac
try
convert logo: logo.jpg
convert logo: logo.png
convert logo: logo.tif
then
convert logo.png logo2.jpg
convert logo.jpg logo2.png
convert logo.tif logo.png
If all those work, then
try
convert logo: -resize 50% logo2.png
convert logo: logo.jpg
convert logo: logo.png
convert logo: logo.tif
then
convert logo.png logo2.jpg
convert logo.jpg logo2.png
convert logo.tif logo.png
If all those work, then
try
convert logo: -resize 50% logo2.png
Re: Convert not working after install on PowerPC Mac
thanks. so tried each command you listed. everything works except when converting to/from .png. going to/from jpg and/or tif works just fine. Something is, clearly, wrong with png.
libpng was installed before ImageMagick:
$ libpng-config --version
1.5.2
any clue what's going on & how to get png working?
libpng was installed before ImageMagick:
$ libpng-config --version
1.5.2
any clue what's going on & how to get png working?
- fmw42
- Posts: 25562
- Joined: 2007-07-02T17:14:51-07:00
- Authentication code: 1152
- Location: Sunnyvale, California, USA
Re: Convert not working after install on PowerPC Mac
try uninstalling libpng and re-installing an older version of libpng. Then re-install IM
mine is currently
libpng-config --version
1.4.5
P.S. I had installed all my delegates via MacPorts, but then I installed IM manually so that I could update it more frequently.
mine is currently
libpng-config --version
1.4.5
P.S. I had installed all my delegates via MacPorts, but then I installed IM manually so that I could update it more frequently.
Re: Convert not working after install on PowerPC Mac
OK. tried it with libpng-1.4.7 and same problem... for some reason ImageMagick is throwing warnings:
..."Application was compiled with png.h from libpng-1.2.26"
and
...libpng-1.2.26 warning: Application is running with png.c from libpng-1.4.7
if you look back at beginning of this thread they're basically the same except replace "1.4.7" with "1.5.2". Where is ImageMagick getting its reference to libpng-1.2.26?
$ which libpng-config
/usr/local/bin/libpng-config
$ libpng-config --version
1.4.7
$ convert -debug all logo: logo.png
... <hundreds of debug lines> ...
Exit BUILD_PALETTE:
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Coder convert[45220]: png.c/MagickPNGWarningHandler/1332/Coder
libpng-1.2.26 warning: Application was compiled with png.h from libpng-1.2.26
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Locale convert[45220]: locale.c/GetLocaleOptions/468/Locale
Searching for locale file: "/usr/local/share/ImageMagick-6.6.9/locale.xml"
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Locale convert[45220]: locale.c/GetLocaleOptions/468/Locale
Searching for locale file: "/usr/local/etc/ImageMagick/locale.xml"
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Locale convert[45220]: locale.c/GetLocaleOptions/468/Locale
Searching for locale file: "/usr/local/share/doc/ImageMagick-6.6.9//locale.xml"
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Locale convert[45220]: locale.c/GetLocaleOptions/468/Locale
Searching for locale file: "/Users/boris/.magick/locale.xml"
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Configure convert[45220]: locale.c/LoadLocaleList/769/Configure
Loading locale configure file "/usr/local/share/ImageMagick-6.6.9/locale.xml" ...
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Configure convert[45220]: locale.c/LoadLocaleList/769/Configure
Loading locale configure file "/usr/local/share/ImageMagick-6.6.9/english.xml" ...
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Exception convert[45220]: png.c/MagickPNGWarningHandler/1335/Exception
Application was compiled with png.h from libpng-1.2.26 `logo.png'
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Coder convert[45220]: png.c/MagickPNGWarningHandler/1332/Coder
libpng-1.2.26 warning: Application is running with png.c from libpng-1.4.7
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Exception convert[45220]: png.c/MagickPNGWarningHandler/1335/Exception
Application is running with png.c from libpng-1.4.7 `logo.png'
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Coder convert[45220]: png.c/MagickPNGWarningHandler/1332/Coder
libpng-1.2.26 warning: Incompatible libpng version in application and library
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Exception convert[45220]: png.c/MagickPNGWarningHandler/1335/Exception
Incompatible libpng version in application and library `logo.png'
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Exception convert[45220]: png.c/WriteOnePNGImage/8214/Exception
memory allocation failed `logo.png'
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Coder convert[45220]: png.c/WritePNGImage/10721/Coder
exit WritePNGImage()
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Cache convert[45220]: cache.c/DestroyPixelCache/1504/Cache
destroy LOGO[0]
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Resource convert[45220]: resource.c/RelinquishMagickResource/810/Resource
Memory: 1.536MB/1.465MiB/2GiB
..."Application was compiled with png.h from libpng-1.2.26"
and
...libpng-1.2.26 warning: Application is running with png.c from libpng-1.4.7
if you look back at beginning of this thread they're basically the same except replace "1.4.7" with "1.5.2". Where is ImageMagick getting its reference to libpng-1.2.26?
$ which libpng-config
/usr/local/bin/libpng-config
$ libpng-config --version
1.4.7
$ convert -debug all logo: logo.png
... <hundreds of debug lines> ...
Exit BUILD_PALETTE:
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Coder convert[45220]: png.c/MagickPNGWarningHandler/1332/Coder
libpng-1.2.26 warning: Application was compiled with png.h from libpng-1.2.26
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Locale convert[45220]: locale.c/GetLocaleOptions/468/Locale
Searching for locale file: "/usr/local/share/ImageMagick-6.6.9/locale.xml"
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Locale convert[45220]: locale.c/GetLocaleOptions/468/Locale
Searching for locale file: "/usr/local/etc/ImageMagick/locale.xml"
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Locale convert[45220]: locale.c/GetLocaleOptions/468/Locale
Searching for locale file: "/usr/local/share/doc/ImageMagick-6.6.9//locale.xml"
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Locale convert[45220]: locale.c/GetLocaleOptions/468/Locale
Searching for locale file: "/Users/boris/.magick/locale.xml"
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Configure convert[45220]: locale.c/LoadLocaleList/769/Configure
Loading locale configure file "/usr/local/share/ImageMagick-6.6.9/locale.xml" ...
2011-05-17T23:07:53-07:00 0:00.221 0.161u 6.6.9 Configure convert[45220]: locale.c/LoadLocaleList/769/Configure
Loading locale configure file "/usr/local/share/ImageMagick-6.6.9/english.xml" ...
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Exception convert[45220]: png.c/MagickPNGWarningHandler/1335/Exception
Application was compiled with png.h from libpng-1.2.26 `logo.png'
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Coder convert[45220]: png.c/MagickPNGWarningHandler/1332/Coder
libpng-1.2.26 warning: Application is running with png.c from libpng-1.4.7
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Exception convert[45220]: png.c/MagickPNGWarningHandler/1335/Exception
Application is running with png.c from libpng-1.4.7 `logo.png'
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Coder convert[45220]: png.c/MagickPNGWarningHandler/1332/Coder
libpng-1.2.26 warning: Incompatible libpng version in application and library
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Exception convert[45220]: png.c/MagickPNGWarningHandler/1335/Exception
Incompatible libpng version in application and library `logo.png'
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Exception convert[45220]: png.c/WriteOnePNGImage/8214/Exception
memory allocation failed `logo.png'
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Coder convert[45220]: png.c/WritePNGImage/10721/Coder
exit WritePNGImage()
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Cache convert[45220]: cache.c/DestroyPixelCache/1504/Cache
destroy LOGO[0]
2011-05-17T23:07:53-07:00 0:00.231 0.171u 6.6.9 Resource convert[45220]: resource.c/RelinquishMagickResource/810/Resource
Memory: 1.536MB/1.465MiB/2GiB
- fmw42
- Posts: 25562
- Joined: 2007-07-02T17:14:51-07:00
- Authentication code: 1152
- Location: Sunnyvale, California, USA
Re: Convert not working after install on PowerPC Mac
try
find /usr | grep "png.h"
and see how many you find. Perhaps you need to clean up all the old (perhaps left over files from previous libpng version). Somehow, IM is getting confused on them or the more current one is not including png.h or not overriding the older one
Perhaps one version of libpng is installed in usr/bin and another in /usr/local/bin
find /usr | grep "png.h"
and see how many you find. Perhaps you need to clean up all the old (perhaps left over files from previous libpng version). Somehow, IM is getting confused on them or the more current one is not including png.h or not overriding the older one
Perhaps one version of libpng is installed in usr/bin and another in /usr/local/bin
Re: Convert not working after install on PowerPC Mac
Thank you! You've been very helpful...and patient!
So there appear to be a few:
$ find /usr | grep "png.h"
/usr/include/wx-2.8/wx/imagpng.h
/usr/local/include/libpng14/png.h
/usr/local/include/png.h
/usr/X11/include/libpng12/png.h
This is taking me into unchartered territory. If I were to just remove the last one that appears to be the culprit (/usr/X11/include/libpng12/png.h) what kind of havoc would ensue?
Also, now seeing X11 I'm wondering if compiling the libwmf library may have created my problems? :
$ cd libwmf-0.2.8.4
$ make clean
make: *** No rule to make target `clean'. Stop.
$ ./configure --without-expat --with-xml --with-png=/usr/X11 --prefix=/usr/local
$ make
$ sudo make install
This library was compiled after libpng but before ImageMagick during yesterday's sudo make install marathon trying to get ImageMagick working... It's the --with-png=/usr/X11 flag that catches my eye. No idea what it's for. I'm just following basic guidelines I took from https://github.com/masterkain/ImageMagi ... tall_im.sh.
So there appear to be a few:
$ find /usr | grep "png.h"
/usr/include/wx-2.8/wx/imagpng.h
/usr/local/include/libpng14/png.h
/usr/local/include/png.h
/usr/X11/include/libpng12/png.h
This is taking me into unchartered territory. If I were to just remove the last one that appears to be the culprit (/usr/X11/include/libpng12/png.h) what kind of havoc would ensue?
Also, now seeing X11 I'm wondering if compiling the libwmf library may have created my problems? :
$ cd libwmf-0.2.8.4
$ make clean
make: *** No rule to make target `clean'. Stop.
$ ./configure --without-expat --with-xml --with-png=/usr/X11 --prefix=/usr/local
$ make
$ sudo make install
This library was compiled after libpng but before ImageMagick during yesterday's sudo make install marathon trying to get ImageMagick working... It's the --with-png=/usr/X11 flag that catches my eye. No idea what it's for. I'm just following basic guidelines I took from https://github.com/masterkain/ImageMagi ... tall_im.sh.
- fmw42
- Posts: 25562
- Joined: 2007-07-02T17:14:51-07:00
- Authentication code: 1152
- Location: Sunnyvale, California, USA
Re: Convert not working after install on PowerPC Mac
At this point, it is going beyond my unix abilities. Perhaps some other unix guru can help further.
All I can suggest is (brute force) remove all libpng components and re-install libpng and then reinstall IM again.
If necessary remove and re-install libwmf also, then re-install it, then libpng, then IM.
All I can suggest is (brute force) remove all libpng components and re-install libpng and then reinstall IM again.
If necessary remove and re-install libwmf also, then re-install it, then libpng, then IM.
Re: Convert not working after install on PowerPC Mac
how can I find out what that "--with-png=/usr/X11" flag for libwmf means exactly?
ugh..UNIX.
ugh..UNIX.
- fmw42
- Posts: 25562
- Joined: 2007-07-02T17:14:51-07:00
- Authentication code: 1152
- Location: Sunnyvale, California, USA
Re: Convert not working after install on PowerPC Mac
meltemi wrote:how can I find out what that "--with-png=/usr/X11" flag for libwmf means exactly?
ugh..UNIX.
Looks like your png.h is coming from your X11 install.
/usr/X11/include/libpng12/png.h
perhaps install libwmf with
--with-png=/usr/local/include/
But again this is just a guess as I am not a unix guru.
Or upgdate your X11 from a more current Xcode Tools that is compatible with your PowerPC version of Mac OSX. (You don't say what you are running -- Tiger, Leopard, Snow Leopard)
Re: Convert not working after install on PowerPC Mac
Hi! So, thank you! You were instrumental in helping me FINALLY sort this out!
I removed the X11 png.h & pngconf.h
then recompiled libwmf without any --with-png flag at all
then recompiled ImageMagick and i can now convert to & from .png
very glad to put this one to rest...for now anyway
Thank you!
I removed the X11 png.h & pngconf.h
then recompiled libwmf without any --with-png flag at all
then recompiled ImageMagick and i can now convert to & from .png
very glad to put this one to rest...for now anyway
Thank you!
- fmw42
- Posts: 25562
- Joined: 2007-07-02T17:14:51-07:00
- Authentication code: 1152
- Location: Sunnyvale, California, USA
Re: Convert not working after install on PowerPC Mac
Glad that it finally worked out successfully for you.