Page 2 of 4
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-29T16:38:20-07:00
by snibgo
I don't have Photoshop.
Code: Select all
convert Original.tif[0] -profile sRGB.icc o.tif
Visual comparison with Microsoft Photo Viewer shows no apparent difference between Original.tif and o.tif, whether I have converted with Q8 int (v6.9.0-0), Q8 HDRI (v6.9.0-0) or Q16 int (v6.9.0-0 or 6.9.1--6).
"identify -verbose o.tif" shows the file is sRGB but contains metadata:
Code: Select all
photoshop:ColorMode: 4
photoshop:ICCProfile: U.S. Web Coated (SWOP) v2
Perhaps this confuses (some versions of) Photoshop. Converting with "-strip" removes this metadata.
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-29T16:53:18-07:00
by fmw42
I think the OP's image meta data is messed up. It says USWebCoatedSwop.icc. However, if I remove it and other profiles using -strip and add the icc profile back, then it looks fine in all viewers including PS.
Code: Select all
convert Original.tif[0] -strip -profile /Users/fred/images/profiles/USWebCoatedSwop.icc -profile /Users/fred/images/profiles/sRGB.icc Original_rgb2.tif
But just removing the icc profile by itself, does not work as follows:
Code: Select all
convert Original.tif[0] +profile icc -profile /Users/fred/images/profiles/USWebCoatedSwop.icc -profile /Users/fred/images/profiles/sRGB.icc Original_rgb2.tif
So the issue must be in the xmp or tiff profile, I would guess.
EDIT: Thanks snibgo. We must have posted at about the same time. We came to the same results.
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-29T17:13:08-07:00
by fmw42
snibgo wrote:"identify -verbose o.tif" shows the file is sRGB but contains metadata:
photoshop:ColorMode: 4
photoshop:ICCProfile: U.S. Web Coated (SWOP) v2
Yes, I see that now also and it is very strange. That kind of confirms that IM may not be writing the correct meta data in the resulting image.
I get
Code: Select all
Properties:
icc:copyright: sRGB built-in
icc:description: sRGB built-in
icc:manufacturer: (lcms internal)
icc:model: sRGB built-in
...
photoshop:ColorMode: 4
photoshop:ICCProfile: U.S. Web Coated (SWOP) v2
...
tiff:photometric: RGB
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-29T17:44:18-07:00
by snibgo
The problem seems to be Photoshop-specific metadata in the file, which IM is passing through from the input to the output.
I don't know to what extent Adobe support other software messing with Photoshop metadata.
We've seen this type of problem before, eg with imge sizes. Perhaps the best solution is for an IM operation "-stripPhotoshop" or similar that removes all Photoshop metadata.
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-30T06:43:26-07:00
by 246246
snibgo wrote: Perhaps the best solution is for an IM operation "-stripPhotoshop" or similar that removes all Photoshop metadata.
This can be done with +profile tiff:37724, but background transparency (that is shown only in Photoshop) is lost.
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-30T07:07:08-07:00
by snibgo
246246 wrote:This can be done with +profile tiff:37724 ...
That doesn't work here.
Code: Select all
convert Original.tif[0] +profile tiff:37724 -profile sRGB.icc o.tif
identify -verbose o.tif
... still shows:
Code: Select all
photoshop:ColorMode: 4
photoshop:ICCProfile: U.S. Web Coated (SWOP) v2
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-30T07:18:16-07:00
by 246246
... still shows:
Code: Select all
photoshop:ColorMode: 4
photoshop:ICCProfile: U.S. Web Coated (SWOP) v2
It seems that CMYK profile is in XMP profile.
So if you want to remove it, need "+profile xmp" also.
(Or if in icc profile, use +profile icc)
If your concern here is to remove ICC profile related part, I think remove xmp and icc is enough.
Code: Select all
d:\tmp>convert -quiet Original.tif[0] +profile icc +profile xmp tif:- | identify -verbose - | find /i "icc"
But adding sRGB.icc comes with Imagemagick windows binary distribution with your command,
Code: Select all
convert -quiet Original.tif[0] +profile xmp +profile icc -profile sRGB.icc o.tif
identify -verbose o.tif | find /i "icc"
icc:copyright: Copyright 2007 International Color Consortium
icc:description: sRGB v4 ICC preference perceptual intent beta
icc:manufacturer: sRGB v4 ICC preference perceptual intent beta
icc:model: sRGB v4 ICC preference perceptual intent beta
Profile-icc: 60960 bytes
icc:copyright: Copyright 2007 International Color Consortium
icc:description: sRGB v4 ICC preference perceptual intent beta
icc:manufacturer: sRGB v4 ICC preference perceptual intent beta
icc:model: sRGB v4 ICC preference perceptual intent beta
Profile-icc: 60960 bytes
Photoshop CS6 complains.
The embedded ICC profile cannot be use because the ICC profile is invalid. Ignoring the profile.
and seems to open it as CMYK.
Code: Select all
convert -quiet Original.tif[0] +profile xmp +profile icc -colorspace sRGB o.tif
generate photoshop-readable tif, and the background is transparent, but the color becomes orange.
[EDIT]
I understand why
convert -quiet Original.tif[0] +profile xmp +profile icc -profile sRGB.icc o.tif
failed.
convert -quiet Original.tif[0] +profile xmp -profile sRGB.icc o.tif
does not complained by Photoshop, but still color is orange (like -colorspace sRGB case above.)
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-30T08:06:29-07:00
by 246246
As far as I tried only way to keep background transparency and keep the color during RGB conversion is:
1) convert tiff to psd with Photoshop
or
convert tiff to psd with ImageMagick and open in Photoshop and lock transparent pixels and save it.
(About lock, related topic is here:
viewtopic.php?f=1&t=27740&p=122734)
Then
2) convert psd to tiff with -colorspace sRGB or using profile. At that time, better to remove CMYK profile in XMP first to avoid conflict.
Code: Select all
convert Original.psd +profile xmp -colorspace sRGB o.tif
or
Code: Select all
convert Original.psd +profile xmp -profile sRGB.icc o.tif
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-30T11:12:33-07:00
by fmw42
These do not work for me.
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-30T12:54:01-07:00
by wellyman1
should I go back to approaching it this way? it did produce the desired result
convert Original.tif -alpha off /Users/tewellman/profiles/sRGB.icc -alpha on rgbout6.tif
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-30T13:28:06-07:00
by fmw42
That does not work for me. If I open that in PS, the colors are wrong. And in the other viewers, the transparency is gone.
I also tried
Code: Select all
convert Original.tif[0] \
\( -clone 0 -alpha extract \) \
\( -clone 0 -alpha off +profile "*" \
-profile /Users/fred/images/profiles/USWebCoatedSwop.icc \
-profile /Users/fred/images/profiles/sRGB.icc \) \
-delete 0 +swap -alpha off -compose copy_opacity -composite Original_rgb5.tif
But the alpha was gone. This seems to be a problem with your original image. All my viewers do not display the transparency, except for PS. I will report this on the bugs forum.
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-30T15:36:28-07:00
by 246246
fmw42 wrote:These do not work for me.
How not work? Whatis the result like?
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-30T15:47:30-07:00
by fmw42
246246 wrote:fmw42 wrote:These do not work for me.
How not work? Whatis the result like?
This command:
Code: Select all
convert Original.tif[0] +profile "xmp" -profile /Users/fred/images/profiles/sRGB.icc Original_rgb2.tif
In other viewers besides PS, it has the right colors, but no transparency. In PS, it has transparency but has orange color where it should be brown.
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-30T17:53:34-07:00
by 246246
fmw42 wrote:
This command:
Code: Select all
convert Original.tif[0] +profile "xmp" -profile /Users/fred/images/profiles/sRGB.icc Original_rgb2.tif
In other viewers besides PS, it has the right colors, but no transparency. In PS, it has transparency but has orange color where it should be brown.
What I wrote (to get correct image) is convert from psd.
Re: converting cmyk tif with background transparency to rgb tiff
Posted: 2015-08-30T18:01:18-07:00
by 246246
wellyman1 wrote:should I go back to approaching it this way? it did produce the desired result
convert Original.tif -alpha off /Users/tewellman/profiles/sRGB.icc -alpha on rgbout6.tif
fmw42 wrote:That does not work for me. If I open that in PS, the colors are wrong. And in the other viewers, the transparency is gone
Transparency is not 'gone' with this conversion, Original.tif has transparency only detected in Photoshop (at least in Windows, imdisplay shows background as white.)
So it is not lost during this conversion.
Photoshop-only-transparency is lost when one remove 37724 tag from tiff.
fmw42 wrote:
Code: Select all
convert Original.tif[0] \
\( -clone 0 -alpha extract \) \
\( -clone 0 -alpha off +profile "*" \
-profile /Users/fred/images/profiles/USWebCoatedSwop.icc \
-profile /Users/fred/images/profiles/sRGB.icc \) \
-delete 0 +swap -alpha off -compose copy_opacity -composite Original_rgb5.tif
But the alpha was gone. This seems to be a problem with your original image. All my viewers do not display the transparency, except for PS. I will report this on the bugs forum.
This is the case. as you remove all profile in frame 2, photoshop-only-transparency is gone.
It is not stored in Original.tif[0] as alpha, so frame 1 does not contain transparency.
Currently, Imagemagick can handle some photoshop layer in tiff (37724 tag), that include layer image itself, and probably layer mask. But transparency information in 37724 is ignored at least in imdisplay.exe. As it is not standard tiff spec, it seems still reasonable, i.e. IMHO it might be wontfix. (But if this happened in psd, this should be fixed.)