Page 1 of 1
Strokewidth in caption (6.5.2-3)
Posted: 2009-05-29T17:24:03-07:00
by jorlando
In 6.5.2-3, when using caption, the -strokewidth
n setting only turns stroke on or off. No matter what value is used, the stroke width stays the same. I see this was a problem back at 6.3.n. Has the problem returned?
Here is a sample command line:
Code: Select all
-size 640x480 -background \#ffffff -strokewidth 12 -stroke \#ff0000 -fill \#ccffff -font /FatFonts/Vitamin.ttf -pointsize 50 -gravity northwest caption:"Font Image Generator" +repage -trim -bordercolor \#ffffff -quality 80 -border 0
Thx
Jeff
Re: Strokewidth in caption (6.5.2-3)
Posted: 2009-05-29T18:29:32-07:00
by magick
We're using ImageMagick 6.5.2-10. We adding a debug statement in the caption module and it reports the same stroke width as specified on the command line (e.g. -strokewidth 12 returns 12.0 as expected for stroke width). We're not sure why its failing for you.
Re: Strokewidth in caption (6.5.2-3)
Posted: 2009-05-29T20:03:09-07:00
by jorlando
OK, Thanks. I'll go work on it some more and see if I can figure out whats going on. Will post back here later.
Jeff
Re: Strokewidth in caption (6.5.2-3)
Posted: 2009-05-29T23:10:36-07:00
by jorlando
Went back and checked scripting, everything looks OK except problem persists where -strokewidth setting controls only on or off at the lowest value.
Code: Select all
-size 640x480 -background \#ffffff -strokewidth 25 -stroke \#ff0000 -fill \#ccffff -font /fonts/SansSerif/Fourteen.ttf -pointsize 28 -gravity northwest caption:"-strokewidth 25" +repage -trim -bordercolor \#ffffff -quality 80 -border 0
yields this image
The same command line with strokewidth set to one yields the same image
We're using ImageMagick 6.5.2-10. We adding a debug statement in the caption module and it reports the same stroke width as specified on the command line (e.g. -strokewidth 12 returns 12.0 as expected for stroke width).
Does the actual image reflect the stroke setting?
Thx
Jeff
Re: Strokewidth in caption (6.5.2-3)
Posted: 2009-05-30T08:27:39-07:00
by magick
Does the actual image reflect the stroke setting?
Yes and we used your command line settings.
Re: Strokewidth in caption (6.5.2-3)
Posted: 2009-05-30T22:44:08-07:00
by jorlando
Interesting observation ... when using annotate instead of caption, -strokewidth works as expected. Also, caption does not resize text to fill an area defined by both width and height and absent pointsize.
Is it possible that IM was not properly installed? Everything works fine otherwise
Re: Strokewidth in caption (6.5.2-3)
Posted: 2009-05-31T20:44:55-07:00
by anthony
caption stroke width also works fine for me!!!
Code: Select all
convert -size 640x320 -gravity center -font Candice -pointsize 48 \
-fill white -stroke black -strokewidth 1 caption:Anthony \
-trim show:
Code: Select all
convert -size 640x320 -gravity center -font Candice -pointsize 48 \
-fill white -stroke black -strokewidth 10 caption:Anthony \
-trim show:
By the way -strokewidth does not 'turn on' stroke. setting the -stroke color to something other than 'none' will 'turn it on'.
Re: Strokewidth in caption (6.5.2-3)
Posted: 2009-06-06T07:51:46-07:00
by jorlando
I noticed some additional issues, among them, -distort doesn't work and -caption absent -pointsize fails to fill, and none of Fred's scripts would run.
So I got a completely new Linux VPS account that was absolutely bare, installed the delegate libraries (libjpeg, libpng, zlib, freetype, and ghostscript) and then ImageMagick 6.5.3-2
Everything works perfectly.
When I run
identify -list configure on the misbehaving installation, the CONFIGURE list shows that the delegates are present but are not listed by name as DELEGATES.
In the working installation, they are listed in both places.
Could this explain the weird behavior that I've described? Also, is there a way to repair this without a complete new install on my public server?
Thx
Jeff
- /$ identify -list configure
Path: /usr/local/lib/ImageMagick-6.5.2/config/configure.xml
Name Value
-------------------------------------------------------------------------------
CC gcc -std=gnu99
CFLAGS -fopenmp -g -O2 -Wall -W -pthread
CONFIGURE ./configure '--with-bzlib=yes' '--with-djvu=yes' '--with-fpx=yes' '--with-freetype=yes' '--with-gvc=yes' '--with-jbig=yes' '--with-jpeg=yes' '--with-jp2=yes' '--with-lcms=yes' '--with-perl=yes' '--with-png=yes' '--with-wmf=yes'
COPYRIGHT Copyright (C) 1999-2009 ImageMagick Studio LLC
CPPFLAGS -I/usr/local/include/ImageMagick
CXX g++
CXXFLAGS -pthread
DEFS -DHAVE_CONFIG_H
DELEGATES
DISTCHECK_CONFIG_FLAGS --disable-deprecated --with-quantum-depth=16 --with-umem=no --with-autotrace=no --with-fontconfig=no --with-gslib=no --with-fontpath= --with-rsvg=no --with-xml=no
EXEC-PREFIX /usr/local
HOST i686-pc-linux-gnu
LDFLAGS -L/usr/local/lib
LIB_VERSION 0x652
LIB_VERSION_NUMBER 6,5,2,3
LIBS -lMagickCore -lm -lgomp -lpthread
NAME ImageMagick
PCFLAGS -fopenmp
PREFIX /usr/local
QuantumDepth 16
RELEASE_DATE 2009-05-09
VERSION 6.5.2
WEBSITE http://www.imagemagick.org
Re: Strokewidth in caption (6.5.2-3)
Posted: 2009-06-06T08:00:38-07:00
by magick
On your public server, pay attention to the output of the configure script. It determines which delegates are validated and summarizes the results at the end of the script. Also check for permission problems. Add -debug configure,module to your command line to ensure ImageMagick can find its configuration files (e.g. delegates.xml) and modules (e.g. jpeg.so).