Legacy ImageMagick Discussions Archive

Hi,

Being new to both IM 6.7 and Solaris10-sparc, i found that i have to feed each error with the packages IM is looking for to make it working by testing
convert logo: logo.gif per IM's instructions.

After installing the required libpng1.2.49 , i still get the error

> convert logo: logo.gif
> ld.so.1: convert: fatal: libpng14.so.14: open failed: No such file or directory

wondering if libpng14 is an update on the 1.2.49 OR is it a separate package to be installed by side of the 1.2.49 ??

is there a favorite place to find / download these packages ?
(i downloaded few packages from unixpackages for a price but i already have installed the only available libpng-1.2.49 already)

thanks

libpng may need zlib. check if that is in your delegates (convert -list configure)

yes,

so far is have installed:

lcms2 and its dependencies
(gcc-3.4.6 and libgcc-3.4.6
jpeg-8d
tiff-4.03
zlib-1.2.8 )

libpng-1.2.49 and its dependency
(libiconv-1.14)

i typed :

>convert -list configure
> ld.so.1: convert: fatal: libpng14.so.14: open failed: No such file or directory
Killed.

Also, is there a list per OS type as what standard packages be needed for IM ? (of course not a 100% list but a list of most)

Thanks.

I am not sure why convert -list configure does not work, unless your version of IM is too old?

There is no standard list of delegates. Each delegate may need its own set of dependencies

However, see http://www.imagemagick.org/download/delegates/

i have the imagemagick-6.8.6.9-sol10-sparc-local.gz
downloaded from unixpackages.com and installed.

Because i had issues with the ImageMagick-sparc-sun-solaris2.10.tar.gz downloaded from ImageMagick site, for lack of executable
'configure' in the entire directory.

( following the instructions 'install from unix source:

$amgick> tar <file>tar.gz
$magick> cd ImageMagick-6.7.0
$magick> ./configure
$magick> make
)


the executable ./configure was nowhere in the pack except the only - configure.h (help file) !

thanks,

i have the imagemagick-6.8.6.9-sol10-sparc-local.gz
downloaded from unixpackages.com and installed.

$magick> cd ImageMagick-6.7.0

I think that should be
to match the version you downloaded.

plakshman wrote:Hi,

Being new to both IM 6.7 and Solaris10-sparc, i found that i have to feed each error with the packages IM is looking for to make it working by testing
convert logo: logo.gif per IM's instructions.

After installing the required libpng1.2.49 , i still get the error

> convert logo: logo.gif
> ld.so.1: convert: fatal: libpng14.so.14: open failed: No such file or directory

wondering if libpng14 is an update on the 1.2.49 OR is it a separate package to be installed by side of the 1.2.49 ??

As I see your another post, you have try to install both IM 6.7 and 6.8, and your convert requires libpng 1.4.x instead of libpng 1.2.x.

First check your convert version and use ldd.

sorry about not being specific:

i did un-(tar/gzip)d the *-6.7.0 and tried
$magick> cd ImageMagick-6.7.0 .... and when it did not work,

i resorted to downloading IM-6.8.6.9 from other source and still trying to run the very basic to test IM working

i go to the directory where i have images and issue:

>identify <image>.gif
>ld.so.1: convert: fatal: libpng14.so.14: open failed: No such file or directory

thanks

plakshman wrote: i resorted to downloading IM-6.8.6.9 from other source and still trying to run the very basic to test IM working

i go to the directory where i have images and issue:

>identify <image>.gif
>ld.so.1: convert: fatal: libpng14.so.14: open failed: No such file or directory

So, if you are sure your identify comes from your other source, it definitely requires libpng1.4.x.
You have to install it.

And for sure, try

% ldd /usr/local/bin/identify

(If you know your identify is other place, replace it with your full path.)
It will report all the dependency and currently missing libraries.

plakshman wrote: Because i had issues with the ImageMagick-sparc-sun-solaris2.10.tar.gz downloaded from ImageMagick site, for lack of executable
'configure' in the entire directory.

Download file from ImageMagick site is binary, so it doesn't need to configure.
You will be use it with adding proper LD_LIBRARY_PATH.
See http://www.imagemagick.org/script/binary-releases.php

Download file from ImageMagick site is binary, so it doesn't need to configure.
You will be use it with adding proper LD_LIBRARY_PATH.

- I did untar/gzip that into a IM_HOME directory

$ export MAGICK_HOME="**/**/**/IM_HOME"

$export PATH=$PATH:$MAGICK_HOME/bin [echo and bin added]

$export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$MAGICK_HOME/lib [echo and lib is added]


than i typed commands and get:

$convert logo: logo.png
$ld.so.1: convert: fatal: libpng14.so.14: open failed: No such file or directory


on your other reply:


ldd /usr/local/bin/identify
libMagickCore-6.Q16.so.1 => /usr/local/lib/libMagickCore-6.Q16.so.1
libMagickWand-6.Q16.so.1 => /usr/local/lib/libMagickWand-6.Q16.so.1
liblcms2.so.2 => /usr/local/lib/liblcms2.so.2
libtiff.so.5 => /usr/local/lib/libtiff.so.5
libjpeg.so.8 => /usr/local/lib/libjpeg.so.8
libpng14.so.14 => (file not found)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1
libfreetype.so.6 => (file not found)
libexpat.so.1 => (file not found)
libXext.so.0 => /usr/openwin/lib/libXext.so.0
libXt.so.4 => /usr/openwin/lib/libXt.so.4
liblzma.so.5 => (file not found)
libbz2.so => /usr/local/lib/libbz2.so
libxml2.so.2 => /usr/lib/libxml2.so.2
libpthread.so.1 => /usr/lib/libpthread.so.1
libiconv.so.2 => /usr/local/lib/libiconv.so.2
libsocket.so.1 => /usr/lib/libsocket.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libz.so => /usr/local/lib/libz.so
libSM.so.6 => /usr/openwin/lib/libSM.so.6
libICE.so.6 => /usr/openwin/lib/libICE.so.6
libX11.so.4 => /usr/openwin/lib/libX11.so.4
libm.so.2 => /usr/lib/libm.so.2
libc.so.1 => /usr/lib/libc.so.1
libgcc_s.so.1 => /usr/local/lib/libgcc_s.so.1
libpng14.so.14 => (file not found)
libfreetype.so.6 => (file not found)
libexpat.so.1 => (file not found)
liblzma.so.5 => (file not found)
libxml2.so.2 (LIBXML2_2.4.30) => (version not found)
libpng14.so.14 => (file not found)
libfreetype.so.6 => (file not found)
libexpat.so.1 => (file not found)
liblzma.so.5 => (file not found)
liblzma.so.5 => (file not found)
libfreetype.so.6 => /usr/sfw/lib/libfreetype.so.6
libz.so.1 => /usr/lib/libz.so.1
libexpat.so.0 => /usr/sfw/lib/libexpat.so.0
libmp.so.2 => /lib/libmp.so.2
libmd.so.1 => /lib/libmd.so.1
libscf.so.1 => /lib/libscf.so.1
libdl.so.1 => /lib/libdl.so.1
libdoor.so.1 => /lib/libdoor.so.1
libuutil.so.1 => /lib/libuutil.so.1
libgen.so.1 => /lib/libgen.so.1
/platform/SUNW,SPARC-Enterprise-T5120/lib/libc_psr.so.1
/platform/SUNW,SPARC-Enterprise-T5120/lib/libmd_psr.so.1

I guess the the system is wanting the libpng14 , no matter what ...

so, i downloaded the delegate libpng-1.6.16.tar.gz from the IM site and un-tar/gz 'd it.
it's a directory and wondering if that get;s installed and how


Thanks,
plakshman

libpng14.so.14 => (file not found)

This would seem to me to imply that libpng was not installed when the binary was compiled by the IM developers when the Solaris binary was created (or it installed some other version, but is looking for this one). So a potential bug? I am not the expert on this.

So I have moved this thread to the Bugs forum

I think the IM developers need to comment.

Thank You fmw42,

Since for Solaris-sparc, i only see the download:
ImageMagick-sparc-sun-solaris2.10.tar.gz on the site http://www.imagemagick.org/script/binary-releases.php

are there other older IM versions/installer for Solaris ( libpng installed with the compiled binary) ?

I searched the site but do not seem to have found an archive of some sort for downloading older versions of the IM binary for Solaris-sparc

i much appreciate your help/time on this
thanks
plakshman

I think there are only old source files that you can download but no binaries.

You might search Google to see if anyone else has archived them or made them available

fmw42 wrote:

libpng14.so.14 => (file not found)

This would seem to me to imply that libpng was not installed when the binary was compiled by the IM developers when the Solaris binary was created (or it installed some other version, but is looking for this one). So a potential bug? I am not the expert on this.

So I have moved this thread to the Bugs forum

I downloaded the official binary ImageMagick-sparc-sun-solaris2.10.tar.gz from ImageMagick and confirmed (with general way) that the convert (and other commands) included in that package requires libpng14.
(As I have no more access to Solaris I use strings as a substitute to check it.)

$ strings convert | grep png
libpng14.so.14

Or cygwin's objdump works better. And the package does not include so file for png and many other libraries, so the user have to search them and install it.
Unfortunately, it seems there is no more free archive for Solaris package.

plakshman wrote:Thank You fmw42,
are there other older IM versions/installer for Solaris ( libpng installed with the compiled binary) ?

I searched the site but do not seem to have found an archive of some sort for downloading older versions of the IM binary for Solaris-sparc

Only I can find is
https://www.opencsw.org/package/imagemagick/

I have no experience for it, though, but it seems it requires their special libraries, so need to replace all the package from there.