Page 1 of 3
bug when converting PSD to TIFF with transparency
Posted: 2015-08-07T19:42:35-07:00
by fmw42
Version: ImageMagick 6.9.1-10 Q16 x86_64 2015-07-25
http://www.imagemagick.org
Copyright: Copyright (C) 1999-2015 ImageMagick Studio LLC
License:
http://www.imagemagick.org/script/license.php
Features: Cipher DPC Modules
Delegates (built-in): bzlib cairo fftw fontconfig freetype gslib jbig jng jp2 jpeg lcms lqr ltdl lzma openexr png ps rsvg tiff webp x xml zlib
With the following PSD, I have converted it to TIFF in Photoshop and similarly in IM, both with compress none. There is background transparency with a shadow under it at the bottom and the top. When I convert in PS to TIFF, the shadow matches. But when I convert in IM, the shadow is much lighter.
RGB PSD with sRGB profile:
psd_to_tiff_alpha_bug/RGB-SRC.psd
PSD to TIFF in Photoshop (compress none):
RGB-SRC_fred_ps_nolayers_none_transp_rle.tif
PSD to TIFF in IM (compress none):
Code: Select all
convert RGB-SRC.psd[0] -compress none RGB-SRC_fred_im_none_trans.tif
RGB-SRC_fred_im_none_trans.tif
Code: Select all
compare -metric rmse RGB-SRC_fred_im_none_trans.tif RGB-SRC_fred_ps_layers_none_transp_rle.tif -format "\n" null:
1244.16 (0.0189846)
EDIT: My client did not want the images shown publicly, so I have removed the links
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-08T01:25:41-07:00
by dlemstra
I think this is happening because Photoshop is using the layer image and IM is using the merged image. When you convert your PSD file to .JPG with IM you will see that the layer has a grey/black background in the shadow at the bottom. I suspect that Photoshop is somehow using that when the TIF is created. But for IM this information is gone because it is using the first (merged) image and if you check the JPEG file you will notice that the background of the shadow is white. You can also see the difference in shadow if you save your .PSD file .PNG with IM. The layer is darker then the merged image. What happens when you save the image again as another .PSD file in Photoshop? Does that correct the issue with the shadow when you convert it in IM?
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-08T10:30:41-07:00
by fmw42
I am saving the flattened layer from PSD to TIFF not to JPG. I tried saving the TIFF in PS with and without saving the layer information, but got the same result both ways. The TIFF compare correctly with the PSD file. IM is producing a lighter shadow.
I saved a new PSD file both with and without layers and converted it to TIFF in IM, but got the same bad comparison as above
P.S. Saving to JPG compares as good as it can considering that IM and PS may have different dct compression tables, and it is not saving the alpha channel. I get a compare rmse of 218.795 (0.00333859).
When I save the to TIFF without the alpha channel, I get a perfect match. So the issue is with the alpha channel processing.
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-08T11:30:28-07:00
by fmw42
More information. It looks like the conversion to TIF in IM is changing the RGB mean values, though the min and max appear the same.
I saved a new PSD file with layers unchecked. Then saved that to TIFF. And also converted that PSD file in IM to TIFF
Code: Select all
convert RGB-SRC_fred_nolayers.psd[0] -compress none RGB-SRC_fred_im_none_trans_psd_nolayers.tif
compare -metric rmse RGB-SRC_fred_im_none_trans_psd_nolayers.tif RGB-SRC_fred_ps_nolayers_none_transp_rle.tif -format "\n" null:
1244.16 (0.0189846)
Looking at the verbose info, I see that the channel means are different, though the min and max are the same. The alpha is the same. So something is happening to the RGB channels to change that and it might be the shadow rendering.
PSD to TIF in Photoshop
Code: Select all
Image: RGB-SRC_fred_ps_nolayers_none_transp_rle.tif
Format: TIFF (Tagged Image File Format)
Mime type: image/tiff
Class: DirectClass
Geometry: 3888x4800+0+0
Resolution: 300x300
Print size: 12.96x16
Units: PixelsPerInch
Type: TrueColorAlpha
Base type: TrueColor
Endianess: MSB
Colorspace: sRGB
Depth: 8/16-bit
Channel depth:
red: 16-bit
green: 16-bit
blue: 16-bit
alpha: 8-bit
Channel statistics:
Pixels: 18662400
Red:
min: 0 (0)
max: 255 (1)
mean: 67.1413 (0.263299)
standard deviation: 78.9552 (0.309628)
kurtosis: -0.165784
skewness: 1.02158
entropy: 0.465623
Green:
min: 0 (0)
max: 255 (1)
mean: 72.3846 (0.283861)
standard deviation: 71.7421 (0.281342)
kurtosis: -0.467159
skewness: 0.766278
entropy: 0.502229
Blue:
min: 0 (0)
max: 255 (1)
mean: 83.5585 (0.32768)
standard deviation: 79.4682 (0.31164)
kurtosis: -1.08445
skewness: 0.503172
entropy: 0.501862
Alpha:
min: 0 (0)
max: 255 (1)
mean: 193.895 (0.760374)
standard deviation: 107.957 (0.423362)
kurtosis: -0.494017
skewness: 1.21938
entropy: 0.082297
PSD to TIF in IM
Code: Select all
Image: RGB-SRC_fred_im_none_trans_psd_nolayers.tif
Format: TIFF (Tagged Image File Format)
Mime type: image/tiff
Class: DirectClass
Geometry: 3888x4800+0+0
Resolution: 300x300
Print size: 12.96x16
Units: PixelsPerInch
Type: TrueColorAlpha
Base type: TrueColor
Endianess: LSB
Colorspace: sRGB
Depth: 8-bit
Channel depth:
red: 8-bit
green: 8-bit
blue: 8-bit
alpha: 8-bit
Channel statistics:
Pixels: 18662400
Red:
min: 0 (0)
max: 255 (1)
mean: 127.852 (0.50138)
standard deviation: 98.9807 (0.38816)
kurtosis: -1.56957
skewness: 0.121846
entropy: 0.747748
Green:
min: 0 (0)
max: 255 (1)
mean: 133.131 (0.522081)
standard deviation: 89.7938 (0.352132)
kurtosis: -1.41754
skewness: 0.14337
entropy: 0.791323
Blue:
min: 0 (0)
max: 255 (1)
mean: 144.295 (0.565861)
standard deviation: 88.7483 (0.348032)
kurtosis: -1.37766
skewness: -0.130155
entropy: 0.794532
Alpha:
min: 0 (0)
max: 255 (1)
mean: 193.895 (0.760374)
standard deviation: 107.957 (0.423362)
kurtosis: -0.494017
skewness: 1.21938
entropy: 0.129034
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-08T11:37:34-07:00
by fmw42
I can achieve a similar lighter shadow when I convert the PSD to JPG, if I use -background white -flatten. If I leave out the -background white -flatten, then the shadow darkness seems to match between IM and PS TIFs.
Photoshop PSD to JPG
RGB-SRC_fred_ps_q12_standard_56K.jpg
IM PSD to JPG with flattening
Code: Select all
convert RGB-SRC.psd[0] -background white -flatten -quality 100 RGB-SRC_fred_im_q100_flatten.jpg
compare -metric rmse RGB-SRC_fred_im_q100_flatten.jpg RGB-SRC_fred_ps_q12_standard_56K.jpg -format "\n" null:
1453.1 (0.0221729)
IM PSD to JPG without flattening
Code: Select all
convert RGB-SRC.psd[0] -quality 100 RGB-SRC_fred_im_q100.jpg
compare -metric rmse RGB-SRC_fred_im_q100.jpg RGB-SRC_fred_ps_q12_standard_56K.jpg -format "\n" null:
218.795 (0.00333859)
Is it possible that IM is flattening the alpha with the RGB channels when converting PSD to TIF, but keeping the alpha as well?
EDIT: My client did not want the images shown publicly, so I have remove the links.
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-08T23:48:59-07:00
by dlemstra
Sorry for my confusing answer, let me try again. First run the following command:
When you look at RGB-SRC-1.jpg you will notice a grey/black background on the part where the shadow is. I have the feeling that we lose that part of the information somehow when we read the merged (first) image. I was hoping that it would be a bug in older versions of Photoshop and saving it again would solve it.
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-09T10:12:59-07:00
by fmw42
Sorry Dirk, I am not sure what you want me to do.
As above, I ran
Code: Select all
convert RGB-SRC.psd[0] -quality 100 RGB-SRC_fred_im_q100.jpg
compare -metric rmse RGB-SRC_fred_im_q100.jpg RGB-SRC_fred_ps_q12_standard_56K.jpg -format "\n" null:
218.795 (0.00333859)
And it looks visually the same as the PSD 0 layer with no lightening of the shadow.
Note that if I flatten the PSD in Photoshop, it does not lighten the shadow.
However, if I flatten the PSD 0 layer on a white background in IM, then I get a similar shadow lightening that I saw in the IM generated PSD to TIFF
without flattening the TIFF.
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-09T10:47:55-07:00
by dlemstra
What I mean is to just look at the jpeg output, just visually inspect them. The layer (RGB-SRC-1.jpg) has a grey/black area in the part where the background should be darker. I am suspecting that this information is not copied to the merged image (RGB-SRC-0.jpg)
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-09T11:31:53-07:00
by fmw42
In photoshop, there is only one layer. So I do not know why converting to JPG in IM shows two layers. I would have thought that the PSD file had one layer and an equivalent flattened layer, though it only shows one layer. If that is true, then why is RGB-SRC-1.jpg so much bigger in dimension (WxH) than the flattened RGB-SRC-0.jpg? Furthermore, the layer -1 has other stripes and the shadow is way too dark.
I took a jpg image that I had and opened it in PS and converted it to PSD and saved it. It also shows only one layer. When I convert that to JPG in IM, I only get one image, not two. Perhaps it has to do with the alpha.
So I pasted that same jpg image into a transparent background in PS and save that as PSD. It shows only one layer in PSD. When I convert that to JPG in IM, I now get two images. The -0 is the original jpg in a white border the size of the transparent PSD file. The second is the original image without the transparency and the size of the original image.
So the transparency is what is causing us to get two JPG images when converted in IM.
However, for my test, the -1 image is smaller than the -0. But in the image I provided first, the -1 image is larger and has some strange striping.
I will have to inquire further of my client where this image came from and how it was created. Something strange seems to be going on in that image.
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-09T11:45:52-07:00
by dlemstra
When we read a PSD file we read the layers and the merged/flattened image. RGB-SRC-1.jpg is the layer and RGB-SRC-0.jpg is the merged/flattened image. I suspect something else that we are not aware off is stored inside the layer. But that should show up in the merged image and I don't understand why that is not happening.
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-09T11:47:46-07:00
by fmw42
I tried the following to convert to tiff. Rather than just the flattened layer, I did the whole psd.
convert: TIFF: negative image positions unsupported RGB-SRC.tif @ error/tiff.c/WriteTIFFImage/3533.
Although I get this error, I do get a two layer tiff. The first layer is the correct size, but the shadow is too light. The second layer is odd with the same gray texture pattern that is inside the image and is also outside the image and so the layer is too big, but the shadow looks reasonable.
So there must have been some strange processing of this image to get it to this state.
Perhaps the negative image position is causing IM trouble.
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-09T12:23:58-07:00
by fmw42
I did another test. I flattened the PSD file in PS so that it had a white background and saved as PSD (RGB-SRC_fred_ps_flattened.psd). I also save it as TIFF (RGB-SRC_fred_ps_flattened.tif). I then flattened the original PSD to TIF in IM and also just converted the PS flattened PSD to TIF in IM.
Code: Select all
convert RGB-SRC.psd -background white -flatten RGB-SRC_fred_im_flatten.psd
Code: Select all
convert RGB-SRC_fred_ps_flattened.psd RGB-SRC_fred_ps_flattened_im.tif
The RGB-SRC_fred_im_flatten.psd had a darker shadow than the other 3, whose shadows matched.
So PS flattening and IM flattening are different for this image, perhaps because of the odd way it was create that caused the strange -1 JPG and TIF image.
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-09T12:57:56-07:00
by fmw42
Dirk,
My client did not want the images shown publicly, so I removed them. If you want any of the images, let me know and I will send them to you privately.
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-10T10:42:09-07:00
by fmw42
I did another set of tests. I converted the PSD to TIF and PNG in PS. Then did the same in IM. In both cases, the IM conversion shows a lighter shadow than the PS version. So PS is doing something different when saving this image to tiff or png than IM using just the 0 (flattened) layer.
However, when I use my own created transparent PSD file and do the same, the compare results are perfect.
So there is something odd about the clients issue and how PS saves it to TIF or PNG
Re: bug when converting PSD to TIFF with transparency
Posted: 2015-08-10T11:45:42-07:00
by fmw42
I can get a better TIF result from IM by using
Code: Select all
convert RGB-SRC.psd -background none -flatten RGB-SRC_im_transpflatten.tif
compared to the previous method
Code: Select all
convert RGB-SRC.psd[0] RGB-SRC_0_im.tif
Code: Select all
compare -metric rmse RGB-SRC_ps_nolayers_none_transp_lzw.tif RGB-SRC_im_transpflatten.tif null:
1155.24 (0.0176279)
Code: Select all
compare -metric rmse RGB-SRC_ps_nolayers_none_transp_lzw.tif RGB-SRC_0_im.tif null:
1244.16 (0.0189846)