Page 1 of 2
how remove date-time stamp from jpg photo?
Posted: 2015-11-06T02:07:47-07:00
by Rob Rutten
The Canon PowerShot D20 camera of a friend added a yellow banner specifying date and time in the lower right
corner of his .jpg photographs. Is there a command-line convert command to remove these? Perhaps by removing
that particular yellow color in a subframe box?
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-06T02:23:34-07:00
by snibgo
Those pixels are now yellow. You can change them to any colour you want, for example by drawing a rectangle, or using "-opaque" to change just that colour.
Or you could make those pixels transparent, and use one of a number of methods that guess what the pixels should be.
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-06T10:52:06-07:00
by fmw42
Something like this might work, if the text were made black
viewtopic.php?p=41498#p41498
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-07T03:16:55-07:00
by Rob Rutten
To fmw42: Dear mastermagician Fred - the duck is example is impressive! In my case the date stamp is a particular yellow color with black
borders so now my question is how to identify that color and make it black. In hope that you may wish to try your mastermagick wand
I put a sample image temporarily at
http://www.staff.science.uu.nl/~rutte10 ... G_2540.jpg.
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-07T10:55:47-07:00
by snibgo
I expect the date caption is always in the same place. I define a region, and make a load of colours transparent.
Code: Select all
%IM%convert img_2540.jpg -alpha opaque -region 970x110+2780+2525 -fuzz 10% -transparent black -transparent #fba420 -transparent #c08000 -transparent #b1832d -transparent #b15000 -transparent #ad4e00 -transparent #731e00 -transparent #805000 -transparent #402800 -transparent #2d0000 c.png
Then I try two techniques to fill the holes. One is a repeated resize of 1/1.1, about 90%. (This gives a better quality than the usual 1/2, or 50%.)
Code: Select all
%IM%convert ^
%INFILE% ^
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
( +clone -resize 90.9091% )
-layers RemoveDups ^
-filter Gaussian -resize "%WW%x%HH%^!" ^
-background None ^
-compose DstOver -layers merge ^
-alpha opaque ^
%OUTFILE%
Then my own process module.
Code: Select all
%IMDEV%convert c.png -process 'fillholes wr 3 lsr 50 v' cv.png
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-07T12:08:29-07:00
by fmw42
snibgo's second method is the best way, but requires his special software. I hope in a near future release of IM that his (inpainting) code will be implemented in Imagemagick. I will recommend that as the next enhancement after what is being worked on now.
To replace a color with another, you can do
convert image -fuzz XX% -fill black -opaque orange result
Measure your orange color as rgb or hex as closely as you can and use that rather than orange. Also use as small an XX% as you can to replace near colors if your orange color is not a constant value. All these methods assume that orange is isolated to the text and does not appear elsewhere in large quantities in your image.
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-09T08:16:12-07:00
by Rob Rutten
Sibgo's second example looks perfect but the warnings on his website indeed imply I should wait for incorporation in imagemagick (I don't
speak windows or c and bat > tcsh also seems far too involved for me).
I don't know how he found all the colors by which he made the date-time stamp transparent ("how identify RGB of a pixel" was another search giving windows but no linux solution) but using them in:
convert IMG_2540.jpg -region 970x110+2780+2525 -fuzz 10% -fill black -opaque black -opaque #fba420 -opaque #c08000 -opaque #b1832d -opaque #b15000 -opaque #ad4e00 -opaque #731e00 -opaque #805000 -opaque #402800 -opaque #2d0000 test2.png
indeed made the date-time stamp black in test2.png. But it doesn't go away with:
morphology -m grayscale -t close -i 2 test2.png test2_close.png
and so I am stuck now at that....
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-09T12:01:26-07:00
by fmw42
I tried the bottom hat and other similar techniques, but they do not work well with such large fonts. I would suggest you use snibgo's first method.
I suspect he measured the colors in and around the orange and black outline to make transparent. Then he just used
repeatedly on every color needed to make the whole text transparent. There are tools available that will allow you to read a color at a given pixels. See for example GIMP.
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-09T13:21:34-07:00
by snibgo
Yes, I used Gimp to find the two main colours (black, and an orange #fba420). I guessed at some intermediate colours: #c08000 etc. That left some pixels opaque, so I added more entries until they were all transparent.
You may find that the same set of colours works for all your photos, in the same way that the same "-region" probably works for all your photos. If either of these isn't true, the job becomes trickier.
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-10T02:14:30-07:00
by Rob Rutten
Dear experts, I am very grateful for your efforts on my behalf! I already tried snibgo's first method but didn't get a working script
using csh (the only I know) for the repeated (+clone -resize) convert entries. Frankly, the -clone option explanation re parentheses is also beyond me... Would you be willing to spell out a csh version?
I indeed hope that a method working for this sample picture will also work for all 340 others from that camera. The labels indeed look the same
(position and color).
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-10T03:03:38-07:00
by snibgo
Sorry, I don't know csh. With bash, you need a backslash \ at the end of each line and before each parenthesis: \( \).
I've thought of a new method for doing this, which might be very effective and fairly fast (the same cloning principle as my "fillholes" module, but much faster):
1. Take the image with holes.
2. Chop it into small rectangles, such that each small rectangle has both opaque and transparent pixels.
3. For each small rectangle:
3a. Search for it in the rest of the image, or a portion of it, that is outside the region. This is a "wildcard" search, where transparent pixels match anything. This gives us the "closest" replacement for each small rectangle.
3b. Put the replacements in their correct positions behind the image with holes, which fills the holes.
As a variation of this: the small rectangles overlap each other, so the replacements also overlap. Assemble them with minimum error boundary cut.
I've written the code for minimum error boundary cut, and the "wildcard" search. Now I just need to glue it together.
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-10T06:45:27-07:00
by Rob Rutten
Dear snibgo - again many thanks for your effort!
I tried my hand at bash but don't get the script working. I put it (fillholes) in
http://www.staff.science.uu.nl/~rutte10 ... termagick/
together with testtrans.png made with your transform-to-transparent convert command.
The new method sounds clever! Maybe something good for mankind will come out of this?
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-10T06:58:35-07:00
by snibgo
For "%WW%x%HH%!", put the dimensions of your image, for example "3000x2000!".
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-10T07:29:14-07:00
by Rob Rutten
Thanks, should have seen that. But it still balks:
fillholes: line 92: -layers: command not found
and similar for the rest of the tail lines if I comment them out one by one. Replaced at my site. Apology I am analphabetic in these matters.
Re: how remove date-time stamp from jpg photo?
Posted: 2015-11-10T07:57:26-07:00
by Rob Rutten
Hurrah! I converted the not-working bash to a csh script in which I concatenated all lines to one and it works! I put it also on my site.
Thanks!
